• Home /
  • Cooking /
  • Cooktops /
  • Gas /
  • Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 36" (90 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered.

Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 36" (90 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered.

Model No: VG491211CA

Features:
  • Five multi-ring burners, up to 59,700 BTU
  • Full electronic power level regulation on 12 levels
  • Full electronic gas valves for precise and reproducible power regulation
  • Automatic fast ignition, electronic flame monitoring with automatic re-ignition
  • Simmer function for cooking on a very low output level

Product Inquiry Form

All fields marked * are required.

Inquire about: Gaggenau 400 series Vario 400 series gas cooktop Stainless steel Width 36" (90 cm) Natural gas. For conversion to LP gas, LP kit (part #423414) must be ordered.
Required Information



Optional information




Companion Products
Wok WP 400 001 - Wok WP 400 001 - (00572615) Call for price
Cooking zones
  • 1 three-ring wok burner (300 W - 5,500 W) 1,000 - 18,800 BTU, suitable for pots up to max. 12 5/8"
  • 2 two-ring high output burners (165 W - 4000 W), suitable for pots up to max. 11".
  • 2 two-ring standard burners (165 W - 2000 W), 570 - 13,600 BTU, suitable for pots up to max. 11".
  • Operation
  • Control knobs with illuminated ring, cooking zone and output level markings.
  • One-handed operation.
  • Full electronic control in 12 output levels for exact power level regulation plus simmer function.
  • Automatic quick ignition.
  • Features
  • Simmer function.
  • Three-part cast iron pan support with flat, continuous pot surface.
  • Brass burner rings.
  • Safety
  • Electronic flame monitoring with automatic re-ignition.
  • Residual heat indication.
  • Safety shut-off.
  • Planning notes
  • Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary.
  • When using the appliance cover VA 440 or adjustment strip VA 450 additional space for cut-out depth needs to be considered.
  • In a combination of Vario cooktops with at least one appliance cover, the adjustment strip VA 450 is required.
  • In a combination of several Vario 400 series cooktops a connection strip VA 420 must be used. Depending on the type of installation- surface- or flush-mounted, with or without cover - the respective VA 420 connecting strip must be used.
  • For flush installation the edge height
    in the cut-out needs to be at least 1/2"
    and for surface-mount 3/8". Ensure a
    continuous cut surface of 90(degree).
  • The weight capacity and stability,
    especially in case of thin countertops,
    must be supported using suitable
    substructures. Take the appliance
    weight and additional loads into
    account.
  • Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer.
  • The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
  • The joint width may vary due to size tolerances of the combinations and of the countertop cut-out.
  • If installing several Vario products in individual cut-outs allow for a minimum distance of 2" between the cooktops. Control knobs to be integrated in the
    base cabinet at drawer level.
    Panel thickness 5/8" - 1".
  • Plan for an electrical connection (the appliance is not operable without power supply).
  • Air intake from above.
  • No intermediate shelf required.
  • The rear panel must consist of a non-flammable material. Wall trims must be resistant to heat.
  • A minimum lateral clearance of at least 12" from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted.
  • Installation in a 36" wide lower cabinet is required.
  • The combination with VL 414 is not recommended, since the air extraction from the centre burner cannot be guaranteed due to the distance.
  • Minimum clearance between gas cooktop and ventilation hood must be 30".
  • Appliance can be snapped into the worktop from above.
  • Rating
  • Total rating 20,500 BTU (6.0 KW).
  • Total Amps: 2 A.
  • 120 V / 60 Hz
  • Total rating: 59,700 BTU. Total Amps: 2 A
  • No dimensions available for this product.

    Style Gas
    Number Of Burners 5
    Wifi Connected No
    Ada Compliant No
    Surface Type Stainless

    Product Downloads

    Installation Instruction Click here to download
    Installation instructions Click here to download
    Instruction manual Click here to download
    Instructions for Use Click here to download
    Product specification sheet. Click here to download

    No rebates currently available for this model.

    No Records Found.

    Please review the error message(s) below and correct your submission as necessary.
    Data has NOT been saved.

    Enter Your Review:

    Rating Legend: 5 Stars = Excellent, 4 Stars = Good, 3 Stars = Average, 2 Stars = Fair, 1 Stars = Poor
    Example: Best Purchase Ever
    Review should be atleast 50 characters
    Example: Your City, State
    We will use the email address provided to contact you in the event that we have questions regarding your review. It will not be made public